Construction Supervisor

Details of the offer

Project Overview, deliverables (what is this person responsible for).
The resource for Wheaton will be an electrical inspector, essentially.
Needed for the installation of five Wartsila units.
A pre-engineered metal building that supports them and the installation of a of a GE combustion turbine.
Electrical is going to consist of 480 Volt, 4160 Volt and 13.8 kilovolt ties to substation distribution, cabling, power conductor, cabling, building wiring at 100 and 22140 Volt 120 Volt.
Resource must have strong electrical knowledge with 4160 distribution, electrical distribution systems, 13.8 transmission distribution, 480 Volt motor control and electrical distribution would be great.
For the Blue Lake plant - Resource will be supporting the installation of 3 Wartsila delay units inside of a Pre-engineered metal building, it's essentially going to require the exact same electrical knowledge as (Wheaton) but without the GE turban knowledge.
The 400 and 480 Volt 416013.8 transmission tie ins.
Somebody who's familiar with building wiring, Power Distribution systems and transmission tie ins.
What are the top 3-5 skills and qualifications required?
Targeting 5 to 7 years of previous electrical [inspection] experience in addition to hands on technical knowledge to be able to understand right/wrong during contractor electrical oversight.
Must have a valid driver's license and reliable transportation to/from site.
Must be able and capable of physical requirements - kneeling, bending, twisting.
WHEATON: Resource must have strong electrical knowledge with 4160 distribution, electrical distribution systems, 13.8 transmission distribution, 480 Volt motor control and electrical distribution would be great.
BLUE LAKE: Essentially going to require the exact same electrical knowledge as (Wheaton) but without the GE turban knowledge.
The 400 and 480 Volt 416013.8 transmission tie ins.
Somebody who's familiar with building wiring, Power Distribution systems and transmission tie ins.
Again, resources must be knowledgeable of electrical distribution systems and electric generation.
Someone that either has the education or has demonstrated the ability to perform this role.
Candidates should have Relevant/experience to job expectations, education/interest and must be able to speak to experience.
Mgr will also look to see if this person worked with any of the current crew and has the availability to start when needed.
What does a typical day look like?
Resources will be expected to be onsite 5 days per week.
They will be responsible for reviewing the project drawings, project specs and familiarize themselves with it.
Also, ensuring that all the electrical components out in the field are being installed per drawing in spec as required.
These resources should have a solid knowledge of best practice so that they can spot any deficiencies in their work practices that the contractor.
What is the size of the group this position will be supporting?
Who are some of the key players this person will be working with?
Construction managers and project engineers, electrical engineers, in addition to logistics personnel.
What are the main technology application/software skills/experience this resource will be required to possess?
Resources should be proficient with PDF/Adobe Pro, Bluebeam and/or other electric drawing management viewing tools.
What is the ramp up time/process for this role?
Aside from having the required skill set, approximately how long will it take to train on process, procedures/policy?
With 5-7 years of previous experience, these resources should be proficient within 1-2 months.
What are the work hours/shift (standard, evening, full time/part time, OT required, on-call for 24/7 operation)?
Standard 10 hours a day/5 days per week with Saturday as required.
OT is required.
Role starts at 50 hours per week.
EEO: "Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of - Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.
"


Source: Appcast_Ppc

Job Function:

Requirements

Autonomous Maintenance Technician - Round Tops Product Group

Autonomous Maintenance Technician - Round Tops Product Group ID 2024-3995 Department Maintenance Position Type Regular Location US-MN-Wa...


From Marvin - Minnesota

Published 9 days ago

Shift Process Manager (Engineering)

Job Type Full-time, Full-time Description The Shift Process Manager is a key leader in the success of our process and production in Dawson. Always comm...


From Puris - Minnesota

Published 9 days ago

Team Lead Process Tech - Plastic Injection Molding

REO Plastics, Inc. is a progressive, ISO certified Custom Injection Molding Company that has been in business for 60 years serving several markets in the Man...


From Jobleads-Us - Minnesota

Published 9 days ago

Quality Compliance Engineer Ii

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum ...


From Abbott - Minnesota

Published 9 days ago

Built at: 2024-11-02T11:22:06.734Z